How do I make up a 1% solution

A 1% solution is 1-part ViralFX™ to 100 parts of water. The simplest way to make this up is to use 10 grams of ViralFX™ powder per litre of warm water. (You can of course use cold water, but it will take longer for the powder to dissolve). Do not use hot water (greater than 40° C). On adding the powder to the water stir the solution and wait for all the components to dissolve and for the powder to be a clear, pink solution. In a very hard water area, the surfactant flakes (white) can take longer to dissolve than the other components.

Procedure:

If you are making a solution of 5 Litres:

• Take drinking water or hard water (borewell water) and warm it to <40°C (Tepid water)
• Add 1% ViralFX™ powder
• Mix it and wait for 5 minutes for all the components to dissolve.
• It will become clear, pink solution.

If you are making a solution of 10 Litres:

• Take 1 Litre of drinking water and warm it to <40°C
• Add 100 grams of ViralFX™ powder
• Mix it thoroughly and let it dissolve for 5 minutes
• Add this 1 Litre ViralFX™ solution to balance 9 Litres of water
• Mix it and wait for 5 minutes for all the components to dissolve.
• It will become clear and pink solution.

If you are making a solution of 20 Litres:

• Take 3 Litre of drinking water and warm it to <40°C
• Add 200 grams of ViralFX™ powder
• Mix it thoroughly and let it dissolve for 5 minutes
• Add this 3 Litre ViralFX™ solution to balance 17 Litres of water
• Mix it and wait for 5 minutes for all the components to dissolve.
• It will become clear and pink solution.