ViralFx™ Compatibility Chart



ViralFx™ is compatible with a wide range of materials including stainless steel, plastics & rubber. Corrosivity trials were performed according to the British Crop Protection Council Testing Scheme using a 2% ViralFx™ solution with 48 hours immersion at 21°C with 24 hours air drying and no rinsing.

Typical applications consists of a 1% solution ratio.


Test MaterialSample weight
 BeforeAfterChange
Aluminium 16.025 16.025 0.000
Brass 15.120 15.090 -0.031
Mild Steel 13.586 12.585 -1.0012
Galvanised Steel 6.915 5.704 -1.2113
Monel Metal 14.550 14.550 0.000
Polypropylene 20.502 20.505 0.000
Acetal Resin 22.160 22.120 -0.040
Nylon MNF 12115 10.811 10.815 0.004
PTFEE 10.502 10.520 0.018
Polyethylene HD 10.630 10.680 0.050
Polyethylene LD 11.870 11.900 0.030
EVA 15.652 15.661 0.009
UPVC 16.174 16.152 -0.022
PVC 12.052 12.042 -0.010
EPDM 16.524 16.519 -0.005
ABS 6.421 6.422 0.001
GRP 19.500 19.500 0.000
Polycarbonate 9.300 9.200 0.100
Polyurethane 34.000 34.007 0.007
Viton 20.420 20.420 0.000
Hytrel 17.004 17.005 0.001
NBR Nitrile 15.100 15.100 0.000
CR Neoprene 19.077 19.063 -0.014
Buna N 9.777 9.777 0.000
Silicone 15.900 15.900 0.000
Red Fibre 5.050 6.190 0.140
 


Typical applications consists of a 1% solution ratio.Legend :
Visual assessments 1 Affected. 2 Rust, 3 Affected

Conclusion

ViralFx™ is non-corrosive, when used as directed.



For more info Contact us