Surface, Vehicles & Farm Equipment Disinfection

 

Surface Disinfection

The level of disease-causing organisms present after basic cleaning can remain high enough to offer a serious disease challenge to livestock. Using a proven disinfectant such as ViralFX™ against viruses, bacteria, fungi, and molds is essential.

DisinfectionViralFx™ Dilution RateApplication
Routine Disinfection for all surfaces, earth, wood, footwear and concrete 1:100 (10 grams of ViralFx™ to every 1 liter of water) Using a brush or pressure washer or other mechanical sprayer, apply ViralFX™ solution at an application rate of 300 ml/m2

Vehicles & Farm Equipment Disinfection

All farm equipment must be thoroughly cleaned and disinfected prior to use or transfer between sites to remove any potential disease-causing organisms and cross contamination.

Farm Equipment DisinfectionViralFx™ Dilution RateApplication
Routine cleaning and disinfection of movable farm equipment 1:100 (10 grams of ViralFx™ to every 1 liter of water) Using a brush or pressure washer, wash all equipment in ViralFX™ solution until visibly clean 
 

 

Surface Application Usage Chart

Estimate the total surface area to be disinfected, including walls and ceilings, multiply the total floor area by 2.5.


Surface Area
to be Disinfected
Volume of
Water Required
Dilution Rate (1:100) @ 1%
Quantity of ViralFX™ to be Added
Dilution Rate (1:200) 0.5%
Quantity of ViralFX™ to be Added
50m2 15 Liters 150 grams 75 grams
100m2 30 Liters 300 grams 150 grams
500m2 150 Liters 1.50 Kg 750 grams
1000m2 300 Liters 3.00 Kg 1.50 Kg
 

 

  1. Decide on the volume of disinfectant solution required at the appropriated dilution rate.
  2. Measure out the appropriate quantity of ViralFX™ powder to achieve the desired dilution rate.
  3. Add the ViralFX™ powder to the water and stir thoroughly to dissolve.
  4. Using a pressure washer or other mechanical sprayer, apply ViralFX™ solution at an application rate of 300ml/m2.