ViralFx™ Compatibility Chart
ViralFx™ is compatible with a wide range of materials including stainless steel, plastics & rubber. Corrosivity trials were performed according to the British Crop Protection Council Testing Scheme using a 2% ViralFx™ solution with 48 hours immersion at 21°C with 24 hours air drying and no rinsing.
Typical applications consists of a 1% solution ratio.
| Test Material | Sample weight | ||
|---|---|---|---|
| Before | After | Change | |
| Aluminium | 16.025 | 16.025 | 0.000 |
| Brass | 15.120 | 15.090 | -0.031 |
| Mild Steel | 13.586 | 12.585 | -1.0012 |
| Galvanised Steel | 6.915 | 5.704 | -1.2113 |
| Monel Metal | 14.550 | 14.550 | 0.000 |
| Polypropylene | 20.502 | 20.505 | 0.000 |
| Acetal Resin | 22.160 | 22.120 | -0.040 |
| Nylon MNF 12115 | 10.811 | 10.815 | 0.004 |
| PTFEE | 10.502 | 10.520 | 0.018 |
| Polyethylene HD | 10.630 | 10.680 | 0.050 |
| Polyethylene LD | 11.870 | 11.900 | 0.030 |
| EVA | 15.652 | 15.661 | 0.009 |
| UPVC | 16.174 | 16.152 | -0.022 |
| PVC | 12.052 | 12.042 | -0.010 |
| EPDM | 16.524 | 16.519 | -0.005 |
| ABS | 6.421 | 6.422 | 0.001 |
| GRP | 19.500 | 19.500 | 0.000 |
| Polycarbonate | 9.300 | 9.200 | 0.100 |
| Polyurethane | 34.000 | 34.007 | 0.007 |
| Viton | 20.420 | 20.420 | 0.000 |
| Hytrel | 17.004 | 17.005 | 0.001 |
| NBR Nitrile | 15.100 | 15.100 | 0.000 |
| CR Neoprene | 19.077 | 19.063 | -0.014 |
| Buna N | 9.777 | 9.777 | 0.000 |
| Silicone | 15.900 | 15.900 | 0.000 |
| Red Fibre | 5.050 | 6.190 | 0.140 |
Typical applications consists of a 1% solution ratio.Legend :
Visual assessments 1 Affected. 2 Rust, 3 Affected
Conclusion
ViralFx™ is non-corrosive, when used as directed.